Laserlab-Europe achievements 2012-2015
Publicly available deliverables
Laserlab-Europe was funded under the Seventh EC Framework Programme (FP7), grant agreement 284464, as an "Integrating Activity", and as such is obliged to communicate and disseminate the results of the research and of any other activity of interest to the community or the public. In addition to the scientific publications in peer-reviewed journals, a number of deliverables will be produced throughout the lifetime of the project, that are mainly reports reflecting the background and status of the various work packages of the project.
D3.1 Laserlab Newsletter issue 1
D3.2 Laserlab Newsletter issue 2
D3.3 Laserlab Newsletter issue 3
D4.1 Intermediate report on Scientific and Technological Exchanges
D4.2 Final report on Technical Workshops
D4.3 Final report on "Collaborative Experimental Programs"
D4.4 Final report on thematic network NAUUL
D4.5 Final report on thematic network NAHEL
D4.6 Final report on JRA networking
D5.1 Intermediate report on human resources development activities
D5.2 Final report on User Training Schools
D5.3 Final report on Short-term User Training for BIOPTICHAL
D5.4 Final report on cooperation with other training programmes
D5.5 Final report on external HR issues
D7.1 Foresight Workshop report
D8.1 Interim report on the NCP activity
D8.2 Final report on the NCP activity
D9.1 Report on LASERLAB-EUROPE International Relations
JRA BIOPTICHAL deliverables:
D30.1 Workstations for the manipulation and analysis of biological samples
D30.2 Techniques for the manipulation and analysis of biological samples
D30.3 Technologies for MP polymerization and biofunctionalisation of polymer scaffolds
D30.4 Workstations for MP nanosurgery
D30.5 Report on methodologies for the detection and manipulation of single molecules
D30.7 Intermediate report on advanced microscopy techniques based on laser plasma X-ray sources
D30.9 Report on workstations for advanced microscopy with extended temporal and spatial resolution
D30.10 Report on workstations and techniques for label-free imaging
D30.11 Intermediate report on in vivo imaging techniques
D30.13 Report on workstations and methodologies for in vivo, deep tissue, high resolution imaging
D31.6 Report on stability control of laser-accelerated electrons
JRA INREX deliverables:
D32.1 Report on the implementation of few-cycle to single cycle mid-IR sources
D32.2 Report on ultrafast spectroscopy, and strong field physics applications in the mid-IR
D32.3 Report on the implementation of ultrashort intense THz sources with tailored properties
D32.4 Report on the improvement of conversion efficiency and photon energy from HHG in gases
D32.5 Report on high energy attosecond pulses using plasmonic structures
D32.6 Report on the implementation of new detectors for various applications in attosecond science
D32.7 Report on various facilities for pump/probe spectroscopic studies in XUV
D32.8 Study of multiphoton processes in the XUV from gas and solid targets
D32.9 Report on the characterisation and optimisation of X-ray FEL and synchrotron for ...
D32.10 Theoretical study of beam transport and FEL operation in the short pulse regime
D32.11 Report on the experimental characterisation of betatron source in the 100 keV range
D32.12 Report on the development of two-stage soft x-ray laser amplifier
D32.13 Study of high repetition-rate HHG or soft x-ray laser
D32.14 Report on the development of new imaging techniques adapted to soft x-ray laser and HHG
D32.15 Interim reports on Deliverables 32.1 - 32.14
JRA EURO-LITE deliverables:
D33.2 Report on the test set‐up for the full OPA system with 12 cm aperture frequency doubling
D33.4 Final report on OPA system with 12 cm aperture: Improved repetition rate of the 12 cm aperture beam line
D33.6 Intermediate report on the technological options investigated for time/space pulse sculpting
D33.8 Report on performance of 1 kHz high contrast OPCPA system generating multi-mJ few cycle pulses
D33.9 Final report on pulse synthesis and comparative analysis of the methods studied
D33.12 Collection of spectroscopic data for disordered crystals and mixed ceramics
D33.13 Report on short pulse laser emission at high repetition rate
D33.14 Feasibility study for the production of 1at.%/2cm diameter Yb:YAG ceramics
D33.16 Comparative study of Laser Induced Damage (LID) of laser materials
D33.17 Experimental set-ups for Laser Induced Damage (LID) studies at low temperature
D33.18 Comparative study of laser materials LID at cryogenic temperatures
D33.19 Comparative study of "fatigue" LID on laser optics
D33.20 Report on performance assessment of amplifier system components
D33.21 Report on characterization of amplifier optical parameters
D33.23 Report on the stabilization loop for declination (pointing) of the laser beam
D33.24 Report on the effect of flooding a high-power thin-disk amplifier with Helium
D33.26 Report on thermal effects/amplification on the parallelepiped ceramic amplifier module
D33.27 Report - Delivery of a high brightness pump source of up to 100 W agerage power
D33.28 Report - Demonstration of high single pass gain in Yb doped crystals
D33.30 Final report on laser characteristics improvements for fs/as pulse generation